ESD polyimide film adhesive tape is made of anti-static polyimide film(PI) coated by silicone adhesive on one side. Due to excellent mechanical,
dielectric strength and heat resistance in PI film,reliable heat-resistance in silicone glue, ESD PI adhesive tape has become perfect class- H insulating
material
Characters:
* Anti-static,excellent heat resistance ,used as class- H insulation and can work for a long term at 180℃ but short time at 260℃;
* Good flexibility, better tear resistance and excellent workability, and can be glued on the different-sized workpieces;
* Self-sticking and good bonding strength , no removal after stripping off;
* Different thickness and width to meet customers’ specific requirements;
Spec.
|
Item
|
Unit
|
ESD-10
|
ESD-20
|
|
Typical thickness
|
mm
|
0.05
|
0.08
|
|
Thickness Scope
|
mm
|
0.05-0.06
|
0.072--0.088
|
|
Basic weight
|
g/m2±10%
|
70
|
105
|
|
Film thickness
|
mm
|
0.025mm(1mil)
|
0.05mm(2mil)
|
|
Supply size
|
W:3mm～520mm; L: 30m（or 33m)+/-1.0m
|
Properties:
|
items
|
Test conditionss
|
Units
|
Typical Value
ESD-10 ESD-20
|
|
1.Visual
|
Even surface free of wrinkles, creases, blister, gel particles and impurity; No tearing and adhesive removal when unrolling
|
|
2. Static Voltage
|
A
|
V
|
<50
|
|
3.Tensile strength
|
A
|
N/cm
|
≥50
|
|
4. Elongation
|
A
|
%
|
≥50
|
|
5.Dielectric strength
|
A
|
kV/mm
|
≥60
|
|
6. Adhesive strength
|
To steel surface
To basis
|
N/cm
|
≥2.3
≤3.6
|
|
7. Flammability
|
A
|
UL-94
|
V-0
|
|
8.Heat -impact Resistant
|
300℃/10sec.
255℃/7sec.(twice)
|
|
No glue removal delamination and legging
|
Storage:
Packed in cartons and sealed in plastic film bag; Keep dry at room temperature.
The shelf life is 12 months.
Applications:
ESD PI tape is widely used in
PCB wave soldering, protection cover of hot air leveling and other fields requiring anti-static.
Note: 1.All of above information is based on our best knowledge, not read as guarantees. Right reserved for corrections.
2.Please contact us if customization requirements.
